Prof. Avi Levy Scientific Publications

Editorship of Collective Volumes

1. Kalman, H., Levy, A., and Hubert, M., The Third Israeli Conference for handling and Conveying of Particulate Solids, Vol. I, pp. 539 & Vol. II, pp. 473, 2000.
2. Levy, A., and Kalman, H., Handbook of Conveying and Handling of Particulate Solids, Elsevier Science, 2001.

Chapters in Collective Volumes

1) Levy, A., Ben-Dor, G., Sorek, S. and Bear, J., “Jump Conditions Across Compaction (Shock) Waves in Porous Media”, in Shock Waves @ Marseille, Ed. R. Brun and L.Z. Dumitrescu, Springer Verlag, Heidelberg, Germany, 203-209, 1995.

2) Levy, A., Skews, B.W., Ben-Dor, G. and Sorek S., “Head-On Collision of Normal Shock Waves with Rigid Porous Materials”, in Shock Waves @ Marseille, Ed. R. Brun and L.Z. Dumitrescu, Springer Verlag, Heidelberg, Germany, 221-226, 1995.

3) Ben-Dor, G., Levy, A. and Sorek, S., "Simulation of Waves Propagation in Saturated Rigid Porous Media and Comparison with Experiments" in Shock & Impact Loads on Structures, Ed. T. S. Lok, Nanyang Technological University Press, Singapore, 25-32, 1996.

4) Levy, A., Li, H. and Ben-Dor, G., “Analytical Prediction of Regular Reflection over Porous Surfaces”, in Shock Waves Eds. B. Sturtevant, J.E. Shepherd, and H.G. Hornung, World Scientific, New Jersey, USA, II, 1333-1338, 1996.

5) Levy, A., Sorek, S., Ben-Dor, G. and Skews, B.W., “Experimental and Numerical Investigation of the Head-on Collision of Planar Shock Waves with Rigid Porous Materials”, in Shock Waves, Eds. B. Sturtevant, J.E. Shepherd, and H.G. Hornung, World Scientific, New Jersey, USA, II, 1357-1362, 1996.

6) Levy, A., "A TVD Based Computer Code for Numerical Simulation of Shock Waves Propagation Through Porous Materials", in Explosion Effects in Granular Materials, Eds. Jenssen, A., Langberg, H. and Madshus, C., FORTIFIKATORISK NOTAT NR 238/96, 415-425,1996.

7) Ben-Dor, G., Levy, A., Sorek, S, "Waves Propagation in Porous Media - Theoretical, Experimental and Numerical Investigations", in Explosion Effects in Granular Materials, Eds. Jenssen, A., Langberg, H. and Madshus, C., FORTIFIKATORISK NOTAT NR 238/96, 431-443,1996.

8) Ben-Dor, G., Levy, A, and Sorek, S., “Simulations of waves propagation in saturated rigid porous media and comparison with experiments” in Shock & Impact Loads on Structures, Ed. T.S. Lok, Nanyang Technological University Press, Singapore, 25-32, 1996.

9) Sorek, S., Levy, A. and Ben-Dor, G., “Shock Wave in Porous Media”, in Fluid Mechanics Series: Fluid Transport in Porous Media, Ed. J. P. Duplessis, Computational Mechanics Publications, England, 215-254, 1997.

10) Levy, A., Mason, D.J. Levi-Hevroni, D., Borde, I., “A Model for the Drying of Wet Solid Particles in the Pipeline of a Pneumatic Conveying System”, in 1997 Jubilee Research Event, IChemE, Rugby, UK 1, 13-16, 1997.

11) Mooney, T., Marjanovic, P., Mason, D.J. and Levy, A., ”An Investigation of Gas-Solids Flow Through Inclined Pipes”, in 1997 Jubilee Research Event, IChemE, Rugby, UK 1, 425-428, 1997.

12) Cairs, C.W., Levy, A. and Mason, D.J., “Detection of Wave-Like Gas-Solids Flow in a Horizontal Pipe Using Pressure Difference Technique”, in Sensors Series: Sensors and their Applications VIII, Ed. A.T. Augousti and N.M. White, Institute of Physics Publications, England,95-100, 1997.

13) Ben-Dor, G., Levy, A. and Sorek, S., “Wave Propagation in Saturated Rigid Porous Media: Numerical Simulation and Comparison with Experiments”, in Numerical Methods for Wave propagation Phenomena, Eds. E. F. Toro and J.F. Clark, Kluwer Academic Publishers, England, 55-73, 1998.

14) Levy A., Jones M.G. and Das S., “An Investigation into the Performance of a Suction Nozzle”, in The Best of Powder & Bulk Solids Handling & Processing: Pneumatic Conveying D/2000, Ed. R. Wohlbier, Trans Tech Publication, III, 73-77, 2000.

15) Britan, A., Ben-Dor, G., Levy, A. and Igra, O., “Shock Wave Interaction with Granular Materials”, in Proceeding of the 22^nd Shock Waves symposium, Eds. G J Ball, R Hillier, G Roberts, University of Southampton, Southampton, United Kingdom, II, 1369-1374, 2000.

16) Levi-Hevroni, D., Sorek, S., Levy, A. and Ben-Dor, G., “Numerical Investigation of the Propagation of Shock Waves in Flexible Porous Materials”, in Proceeding of the 22^nd Shock Waves symposium, Eds. G J Ball, R Hillier, G Roberts, University of Southampton, Southampton, United Kingdom, II, 1375-1380, 2000.

17) Skews B.W., Levy, A. and Levi-Hevroni, D., “Shock Wave Propagation in Porous Media”, in Handbook on Shock Waves, Eds. G. Ben-Dor, O. Igra & T. Elperin, Academic Press, Boston, Mass., USA, 2000.

18) Britan A. & Levy A., "Weak Shock Wave Interaction With Inert Granular Media", in Handbook on Shock Waves, Eds. G. Ben-Dor, O. Igra & T. Elperin, Academic Press, Boston, Mass., USA, 2000.

19) Levy, A., Jelinek, M. and Borde, I., " Single Stage Absorption System Based on Refrigerants R125 and R134a With Dmeteg", Thermal Science 2000, Proceeding of the ASME-ZSITS International Thermal Science Seminar, Bled, Slovenia, Eds. E. Bergles & I. Golovic, 511-514, 2000.

20) Levy A., Borde I. & Jelinek M., “Performance of a Triple-Pressure Level Absorption Cycle with Organic Working Fluids”, ECOS 2002, the 15^th International Conference of Efficiency, Costs, Optimization, Simulation and Environmental Impact of Energy Systems, Berlin, Germany, Eds. G. Tsatsaronis, M. J. Moran, F. Cziesla & T. Bruckner, 957-964, 2002.

21) Koyfman, A., Jelinek, M. Levy, A., and Borde, I., "Experimental Study On Bubble Pump Performance With Organic Working Fluids", HEAT 2002, Conference Proceeding of The Third International Conference on Transport Phenomena in Multiphase Systems, Baranow Sandoierski, Poland, Eds. M. E. Poniewski, T. M. Wojcik & R. Pastuszko, 327-332, 2002.

22) Malamud G., Levi-Hevroni D. and Levy A., ”Two-dimensional effects of the head on interaction between planar shock wave with low density foam”, Ed. Z. Jiang, in Proceedings of the 24^th International Symposium on Shock Waves, Beijing, China, 2, 1048-1054, 2004.

23) Borde, I. and Levy A., “Pneumatic and Flash Drying”, in Handbook of Industrial Drying, 3^rd Edition, Ed. A. S. Mujumdar, CRC Press, UK, 2006.

24) M. Mezhericher, A. Levy and I. Borde, “Theoretical Drying Model of Single Droplets Containing Insoluble or Dissolved Solids”, in Drying 2006, Ed. I. Farkas, A, 221-218, 2006.

25) M. Mezhericher, A. Levy and I. Borde, “Heat And Mass Transfer and Breakage of Particles in Drying Processes”, in Drying 2008, Ed. B.N. Thorat, A, 170-178, 2008.

26) M. Mezhericher, A. Levy and I. Borde, “Comparison Between 2D And 3D Modelling Of Spray Drying Process”, in Drying 2008, Ed. B.N. Thorat, B, 621-628, 2008.

27) Levy A. and Borde, I., “Pneumatic and Flash Drying”, in Handbook of Industrial Drying, 4^th Edition, Ed. A. S. Mujumdar, CRC Press, UK, 2013.

28) M. Mezhericher, A. Levy and I. Borde, "Theoretical Modeling and Numerical Simulation of Spray Drying Processes", in Handbook of Industrial Drying, 4^th Edition, Ed. A. S. Mujumdar, CRC Press, UK, 2013.

Refereed Articles in Scientific Journals

1) Levy, A., Ben-Dor, G., Sorek, S. and Bear, J., “Jump conditions across strong compaction waves in gas saturated rigid porous media”, Shock Waves, 3, 2, 105-111, 1993.

2) Levy, A., Ben-Dor, G., Skews, B.W. and Sorek, S., “Head-On Collision of Normal Shock Waves with Rigid Porous Materials”, Experiments in Fluids, 15, 183-190, 1993.

3) Li, H., Levy, A. and Ben-Dor, G., ”Analytical Prediction of Regular Reflection over Porous Surfaces and Comparison with Experiments”, Journal of Fluid Mechanics, 282, 219-232, 1995.

4) Li, H., Levy A. and Ben-Dor, G., “Head-On Interaction of Planar Shock Waves with Rigid Porous Materials - Analytical Model”, Fluid Dynamics Research, 16, 203-215, 1995.

5) Levi-Hevroni, D., Levy, A., Borde, I., ”Mathematical Modeling of Drying of Liquid/Solid Slurries in Steady State One-Dimensional Flow”, Drying Technology: An International Journal, Vol.13(5-7), 1187-1201, 1995.

6) Levy, A., Sorek, S., Ben-Dor, G. and Bear, J., “Evolution of the Balance Equations in Saturated Thermoelastic Porous Media Following Abrupt Simultaneous Changes in Pressure and Temperature”, Transport in Porous Media, 21, 241-268, 1995.

7) Levy, A., Sorek, S., Ben-Dor, G. and Skews, B., “Wave Propagation in Saturated Rigid Porous Media: Analytical Model and Comparison with Experimental Results”, Fluid Dynamics Research, 17, 49-65, 1996.

8) Krylov, A., Sorek, S., Levy, A. and Ben-Dor, G., “Simple Waves in Saturated Porous Media. I. The Isothermal Case”, Japan Society of Mechanical Engineers International Journal, Ser. B, 39(2), 294-298, 1996.

9) Sorek, S., Krylov, A., Levy, A. and Ben-Dor, G., “Simple Waves in Saturated Porous Media. II. The Non-Isothermal Case”, Japan Society of Mechanical Engineers International Journal, Ser. B, 39(2), 299-304, 1996.

10) Levy, A., Ben-Dor, G. and Sorek, S., “Numerical Investigation of the Propagation of Shock Waves in Rigid Porous Materials: Development of the Computer Code and Comparison with Experimental Results”, Journal of Fluid Mechanics, 324, 163-179, 1996.

11) Levy, A., Mooney, T., Marjanovic, P. and Mason, D.J., “A Comparison of Analytical and Numerical Models for Gas-Solid Flow through Straight Pipe of Different Inclinations with Experimental Data”, Powder Technology, 93, 253-260, 1997.

12) Ben-Dor, G., Levy, A. and Sorek, S., “Numerical Investigation of the Propagation of Shock Waves in Rigid Porous Materials - Solution of the Riemann Problem”, International Journal of Numerical Methods for Heat & Fluid Flow, 7(8), 801-813, 1997.

13) Schotz, M., Levy, A., Ben-Dor, G. and Igra, O., "Analytical Prediction of the Wave Configuration Size in Steady Flow Mach Reflections", Shock Waves, 7(6), 363-372, 1997.

14) Mason, D.J. Marjanovic, P. and Levy, A., “A Simulation System for Pneumatic Conveying Systems”, Powder Technology, 95, 7-14, 1998.

15) Levy, A., Mason, D.J. Levi-Hevroni, D., Borde, I., “Drying of Wet Solid Particles in a Steady State One Dimensional Flow”, Powder Technology, 95, 15 -23, 1998.

16) Levy, A., Ben-Dor, G. and Sorek, S., "Numerical Investigation of the Propagation of Shock Waves in Rigid Porous Materials. Flow Field Behavior and Parametric Study", Shock Waves, 8, 127-137, 1998.

17) Mason, D.J., Levy, A. and Marjanovic, P., “The Influence of Bends on the Performance of Pneumatic Conveying Systems”, Advanced Powder Technology, 9(3), 197-206, 1998.

18) Mason, D.J. and Levy, A., “A Comparison of 1D and 3D Models for the Simulation of Gas-Solids Transport Systems”, Applied Mathematical Modelling, 22, 517-532, 1998.

19) Levy, A. and Mason, D.J., “The Effect of a Bend on the Particles Cross-Section Concentration and Segregation in Pneumatic Conveying Systems”, Powder Technology, 98, 95- 103, 1998.

20) Levy, A., Kogan, E. and Kalman, H., “Simulation of a Air Permeation though a Moving Plug Conveying in a Vertical Pipe”, Powder Technology, 98, 209-216, 1998.

21) Levy, A., Levi-Hevroni D., Sorek, S. and Ben-Dor, G., “Derivation of Forchhiemer Terms and their Verification by Application to Compaction Waves Propagation in Porous Media”, Int. J. Multiphase Flow, 25, 683-704, 1999.

22) Levy, A. and Borde, I., “Steady State One Dimensional Flow Model for a Pneumatic Dryer”, Chemical Engineering and Processing, 38, 121-130, 1999.

23) Levy, A., “Shock Waves Propagation in Granular Materials”, Powder Technology, 103, 212-219, 1999.

24) Sorek, S., Levy, A., Ben-Dor, G. and Smeulders, D., "Contributions to Theoretical/Experimental Developments in Shock Waves Propagation in Porous Media", Transport in Porous Media, 34, 63-100, 1999.

25) Marjanovic, P., Levy, A. and Mason, D.J., “An Investigation of the Flow Structure Through Abrupt Enlargement of Circular Pipe”, Powder Technology, 104, 296-303, 1999.

26) Levy, A., “Two-Fluid Approach for Plug Flow Simulations in Horizontal Pneumatic Conveying”, Powder Technology, 112, 263-272, 2000.

27) Han, T., Levy A., Kalman, H. and Peng, Y., “Model for Dilute Gas-Particle Flows in Constant-Area Lance with Heating and Friction”, Powder Technology, 112, 283-288, 2000.

28) Levy, A., and Mason D.J., “Two Layer Model for Non-Suspension Gas-Solids Flow in Pipes” Powder Technology, 112, 256-262, 2000.

29) Mason D.J. and Levy, A., “A Model for Non-Suspension Gas-Solids Flow of Fine Powders in Pipes”, Int. J. Multiphase Flow, 27(3), 415-435, 2001.

30) Levy, A. and Borde, I., “Two-Fluid Model for Pneumatic Drying of Particulate Materials”, Drying Technology: An International Journal, 19(8), 1773-1788, 2001.

31) Levy, A., Jelinek, M. and Borde, I., “Single stage absorption system based on refrigerants R125 and R134a with DMETEG”, ASME Journal of Mechanical Engineering, 47(8), 497-500, 2001.

32) Levi-Hevroni, D., Levy, A., Ben-Dor, G. and Sorek, S., “Numerical Investigation of the Propagation of Planar Shock Waves in Saturated Flexible Porous Materials: Development of the Computer Code and Comparison with Experimental Results” Journal of Fluid Mechanics, 462, 285-306, 2002.

33) Jelinek, M., Levy, A. and Borde, I., “Performance Of A Triple-Pressure Level Absorption Cycle With R125- N,N'-DIMETHYLETHYLUREA”, Applied Energy, 71, 171-189, 2002.

34) Levy, A., Jelinek, M. and Borde, I., ”Numerical Study On The Design Parameters Of A Jet Ejector For Absorption Systems”, Applied Energy, 72, 467-478, 2002

35) Han, T., Levy, A. and Kalman H., “DEM Simulation for Attrition of Salt During Dilute Phase Pneumatic Conveying” Powder Technology, 129(1-3), 92-100, 2003.

36) Han, T., Kalman H. and Levy, A., “DEM Simulation of Particle Comminution in Jet Milling”, Particulate Science and Technology – An International Journal, 20(4), 325-340, 2003.

37) Malamud, G., Levi-Hevroni D. and Levy A., “Two-dimensional model for simulating the shock wave interaction with rigid porous materials”, AIAA journal, 41(4), 663-673, 2003.

38) Cairns C.W., Levy A. and Mason D.J., “Three Dimensional Effects of Wave-Like Flow in Horizontal Pipelines”, Advanced Powder Technology, 14(1), 71-86, 2003.

39) Koyfman A., Jelinek M., Levy A. & Borde I., “An Experimental Investigation of Bubble Pump Performance for Diffusion Absorption Refrigeration System with Organic Working Fluids”, Applied Thermal Engineering, 23, 1881-1894, 2003.

40) Skuratovsky, I., Levy A. and Borde I., “Two-Fluid, Two-Dimensional Model for Pneumatic Drying”, Drying Technology, 21(9), 1649-1672, 2003.

41) Han, T., Kalman H. and Levy, A., “Theoretical and Experimental Study of Multi-Compression Particle Breakage”, Advanced Powder Technology, 14(5), 605-620, 2003.

42) Koyfman A., Jelinek M., Levy A. & Borde I. “Experimental Study on Bubble Pump Performance with Organic Working Fluids”, the Kielce University of Technology, series Mechanics, 25-32, 2003

43) Levy, A., Jelinek, M., Borde, I. & Ziegler F., “Performance of an advanced absorption cycle with R125 and different absorbents”, Energy, 29, 2501-2515, 2004.

44) Skuratovsky I. and Levy A., “Finite Volume Approach for Solving Multiphase Flows in Vertical Pneumatic Dryers”, The International Journal of Numerical Methods for Heat & Fluid Flow, 14(8), 980-1001, 2004.

45) Skuratovsky, I., Levy A. and Borde I., “Two-Dimensional Numerical Simulations of the Pneumatic Drying in Vertical Pipes”, Chemical Engineering and Processing 44(2), 187-192, 2005.

46) Zohar A., Jelinek M., Levy A. and Borde I., “Numerical Investigation of a Diffusion Absorption Refrigeration Cycle”, International Journal of Refrigeration, 28(4) 515-525, 2005.

47) Sorek, S., Levi-Hevroni, D., Levy, A., and Ben-Dor, G., "Extensions to the Macroscopic N.S. Equations", Transport in Porous Media, 61, 215-133, 2005.

48) Malamud, G., Levi-Hevroni D. and Levy A., “Head-on collision of a planar shock wave with deformable porous foams", AIAA journal, 43(8), 1776-1783, 2005.

49) Orian G., Jelinek M. and Levy A., "Spray Formation of Binary Organic Solution for an Absorption Refrigeration System ", Applied Thermal Engineering, 26, 872-880, 2006.

50) Han, T., Petukhov, Y., Levy A. and Kalman, H., "Theoretical and experimental study of multi-impact breakage of particles", Advanced Powder Technology, 17(2), 135-157, 2006.

51) Levi-Hevroni, D., Levy, A., Ben-Dor, G. and Sorek, S., "The Interaction of Planar Shock Waves with Multiphase Saturated Flexible Porous Materials – A Numerical Investigation", J. Fluid Mech., 563, 159–188., 2006.

52) Levy A. & Koyfman A., Jelinek M., “Flow Boiling of Organic Binary Mixtures", International Journal of Multiphase Flow, 32, pp.1300–1310, 2006.

53) Zohar, A., Jelinek, M., Levy, A. and Borde, I., "The Influence of Diffusion Absorption Refrigeration Cycle Configuration on The Performance", Applied Thermal Engineering, 27, 2213–2219, 2007.

54) Jelinek M., Levy A. & Borde I., "Density of Organic Binary Mixtures from Equilibrium Measurements", International Journal of Refrigeration, 30(3), 471- 481, 2007.

55) Levy A. and Sayed M., “Numerical simulations of granular materials flow around obstacles: The role of the interstitial gas", Phy. Flu.,19, 023302, pp.1-9, 2007.

56) Levy, A. and Kalman H., "Numerical Study of Particle Motion in Jet Milling", Particulate Science & Technology, 25, 1–8, 2007.

57) Mezhericher, M., Levy A. and Borde, I., “Theoretical Drying Model of Single Droplets Containing Insoluble or Dissolved Solids” Drying Technology, 25(6), 1025-1032, 2007.

58) A. Levy, “Numerical Simulations of Granular Materials Flow Around Obstacles”, Bulk Solids & Powder Science & Technology, 2, 118- 124, 2007.

59) Levy A. and Sayed M., " Numerical Simulations of the Flow of Dilute Granular Materials Around Obstacles", Powder Technology, 181(2), 137-148, 2008.

60) Mezhericher, M., Levy A. and Borde, I., “Modelling of Particle Breakage During Drying”, Chem. Eng. & Processing, 47, No., 1410–1417, 2008

61) Mezhericher, M., Levy A. and Borde, I., “Heat and Mass Transfer of Single Droplet/ Wet Particle Drying”, Chemical Engineering Science, 63(1), 12 – 23, 2008.

62) Mezhericher, M., Levy A. and Borde, I., “The Influence of Thermal Radiation on Drying of Single Droplet/ Wet Particle”, Drying Technology, 26(1), 78-89, 2008.

63) Mezhericher, M., Levy A. and Borde, I., “DROPLET-DROPLET INTERACTIONS IN SPRAY DRYING USING 2D COMPUTATIONAL FLUID DYNAMICS”, Drying Technology, 26(3), 265–282, 2008.

64) Zohar, A., Jelinek, M., Levy, A. and Borde, I., “The Influence of the Generator and Bubble Pump Configuration on the Performance of Diffusion Absorption Refrigeration (DAR) System" International Journal of Refrigeration, 31, 962 – 969, 2008.

65) Jelinek, M., Levy, A. and Borde, I.,” The performance of a triple pressure level absorption cycle (TPLAC) with working fluids based on the absorbent DMEU and the refrigerants R22, R32, R124, R125, R134a and R152a”, Applied Thermal Engineering, 28 1551-1555, 2008.

66) Brosh, T., Batat, Y. , Kalman H., Levy A. and Brown A. B., “Particle Motion and Classification in a Jet Mill”, Bulk Solids & Powder Science & Technology, 3(2), 83-88, 2008.

67) Orian, G. Jelinek, M. and Levy, A., “Heat Transfer to Sub-cooled Binary Solution In Horizontal Tube”, Applied Thermal Engineering, 29, 661–669, 2009.

68) Mezhericher, M., Levy, A. and Borde, I., “Modelling of Droplet Drying in Spray Chambers Using 2d and 3d Computational Fluid Dynamics”, Drying Technology, 27, 359-370, 2009

69) Zohar, A., Jelinek, M., Levy, A. and Borde, I., “Performance of Diffusion Absorption Refrigeration Cycle with Organic Working Fluids", International Journal of Refrigeration, 32(6), 1241-1246, 2009.

70) Shimshi, E., Ben-Dor G. and Levy A., "Viscous simulation of shock reflection hysteresis in overexpanded planar nozzles", J. Fluid Mech., 635, 189-206, 2009

71) Shimshi, E., Ben-Dor G. and Levy A., " Numeric and geometric sensitivity of nozzle flow simulation", International Journal of Aerospace Innovations, 1(2), 57-66, 2009.

72) Mezhericher, M., Levy, A. and Borde, I.,"Heat and mass transfer and breakage of particles in drying processes”, Drying Technology, 27(7), 870-877, 2009.

73) Brosh, T. and Levy A., Modelling of Heat Transfer in Pneumatic Conveyer Using a Combined DEM-CFD Numerical Code, Drying Technology, 28(2), 155-164, 2010.

74) Mezhericher, M., Levy, A. and Borde, I.," Theoretical Models of Single Droplet Drying Kinetics: A Review”, Drying Technology, 28(2), 278-293, 2010.

75) Orian, G., Jelinek, M. and Levy, A., “Flow Boiling of Binary Solution in Horizontal Tube”, Energy, 35(1), 35-44, 2010.

76) Mezhericher, M., Levy, A. and Borde, I., "Three-dimensional modelling of pneumatic drying Process", Powder Technology, 2(10), 371-383, 2010.

77) Kapusta, A., Levy, A. and Mikhailovich, B., On multi-frequency induction heating. MAGNETOHYDRODYNAMICS 46(2), 219–227, 2010.

78) Shimshi, E., Ben-Dor G. and Levy A., Numeric study of flow separation and shock reflection hysteresis in planar nozzles, International Journal of Aerospace Innovations, 2(4), 221-233 , 2010.

79) Mezhericher M., Levy A. and Borde I., " Spray Drying Modelling Based on Advanced Droplet Drying Kinetics", Chemical Engineering and Processing: Process Intensification, 49, 1205-1213, 2010.

80) Mezhericher M., Brosh T. and Levy A., Modelling of Particle Pneumatic Conveying using DEM and DPM Methods, Particulate Science & Technology, Vol.29(2) , 197-208, 2011.

81) Brosh T., Kalman H. and Levy A., Implementation of Comminution Functions in DEM Simulation of Dilute-Phase Pneumatic Conveying, Granular Matter 13(2): 447-453, 2011.

82) Mezhericher M., Levy A., Borde I., Modelling the Morphological Evolution of Nanosuspension Droplet in Constant-Rate Drying Stage, Chemical Engineering Science 66, 884–896, 2011.

83) Shimshi E., Ben-Dor G. and Levy A., Viscous simulation of shock reflection hysteresis in ideal and tapered over expanded planar nozzles, Shock Waves: Volume 21(3), 205-214, 2011.

84) Rozenblat Y., Portnikov D., Levy A., Kalman H., Aman S. and Tomas J., Strength Distribution of Particles under Compression, Powder Technology, 208 , 215-224, 2011.

85) Jelinek M., Levy A. and Borde I., Performance of a triple-pressure level absorption/compression cycle, Applied Thermal Engineering, 42, 2-5, 2012.

86) Kapusta A., Levy A., Mikhailovich B., Phase-modulated currents in induction heating, COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 30(5), 1598-1605

87) Brosh T., Kalman H. and Levy A., Fragments spawning and interaction models for DEM breakage simulation, Granular Matter, 16(6), 765-776, 2011.

88) Rozenblat Y., Grant E., Levy A., Kalman H. and Tomas J., Selection and Breakage Functions of Particles under Impact Loads, Chemical Engineering Science, 71, 56-66, 2012.

89) Mezhericher M., Levy A., Borde I., Probabilistic Hard-Sphere Model of Binary Particle-Particle Interactions In Multiphase Flow of Spray Dryers, International Journal of Multiphase Flow, 43, 22-38, 2012.

DOI: 10.1016/j.ijmultiphaseflow.2012.02.009

90) Mezhericher M., Levy A., Borde I., Three Dimensional Spray Drying Modelling Based on Advanced Droplet Drying Kinetics, Drying Technology, 30, 1256–1273, 2012.

91) Levy A., Modern Drying Technology Vol 4: Energy Savings – Review, Drying Technology, 32, 246, 2014.

92) Mezhericher M., Naumann M., Peglow M., Levy A., Tsotsas E. and Borde I., Continuous Species Transport and Population Balance Models for First Drying Stage of Nanosuspension Droplets, Chemical Engineering Journal, 210, 120–135, 2012.

93) Kapusta A., Levy A., Mikhailovich B., Convective Heat Transfer by Turbulent Melt Flow Excited by Travelling Magnetic Field at the Inductive Heating, J. of Iron and Steel Research, International, 19, 771-774, 2012.

94) Rozenblat Y., Levy A., Kalman H. and Tomas J., Impact Velocity and Compression Force Relationship - Equivalence Function, Powder Technology, 235, 756–763, 2013.

95) Rozenblat Y., Levy A., Kalman H., Peyron I., and Ricard F., A model for particle fatigue due to impact loads, Powder Technology, 239, 199–207, 2013.

96) Tsory T., Ben-Jacob N., Brosh T. and Levy A., Thermal DEM-CFD modeling and simulation, Powder Technology, 244, 52-60, 2013.

97) Rodnianski V., Krakauer N., Darwesh K., Levy A., Kalman H., Peyron I., and Ricard. F., Aerodynamic classification in a spiral jet mill, Powder Technology 243, 110–119, 2013.

98) Ben-David O., Levy A., Mikhailovich B., and Azulay A., 3D numerical and experimental study of gallium melting in a rectangular container, International Journal of Heat and Mass Transfer, 67, 260–271, 2013.

99) Maurice U., Mezhericher M., Levy A. and Borde I., Drying of Droplet Containing Insoluble Nanoscale Particles: Numerical Simulations And Parametric Study, Drying Technology, 31, 1790–1807, 2013.

100) Brosh T., Kalman H. and Levy A., Fragments spawning and interaction Accelerating CFD-DEM simulation of processes with wide range particle size distribution, Particuology, 12, 113-121, 2014.

101) Brosh, H. Kalman and A. Levy, " DEM-CFD simulation of Particle Comminution in Jet-Mill, Powder Technology, 257, 104-112, 2014.

102) Ben-David O., Levy A., Mikhailovich B., and Azulay A.," Magnetohydrodynamic flow excited by rotating permanent magnets in an orthogonal container" , Physics of Fluids, 26, 097104, 2014.

103) Ben-David O., Levy A., Mikhailovich B., and Azulay A., Impact of rotating permanent magnets on gallium melting in an orthogonal container, International Journal of Heat and Mass Transfer, 81, 373–382, 2015.

104) Gurevich B., Jelinek M., Levy A. and Borde I., "Performance of a set of parallel bubble pumps operating with a binary solution of R134a-DMAC", Applied Thermal Engineering, 75, 724–730, 2015.

105) Mezhericher M., Levy A., and Borde I., Multi-Scale Multiphase Modeling of Transport Phenomena in Spray-Drying Processes, Drying Technology, 33(1), 2-23, 2015.

106) Mikhailovich B., Ben-David O., Levy A., Liquid Metal Rotating Flow Under Permanent Magnetic System Impact, Magnetohydrodynamics 51(1), 171–176, 2015.

107) Uzi A., Ostrovski Y., Levy A., Modeling And Simulation of Mono-Layer Coating, Drying Technology, 33(15-16), 1798-1807, 2015.

108) Maurice U., Mezhericher M., Levy A. and Borde I., Drying of Droplets Containing Insoluble Nanoscale Particles: Second Drying Stage, Drying Technology, 33(15-16), 1837-1848, 2015.

109) Shimshi E., Ben-Dor G., Levy A. and Krothapalli A., “Asymmetric and unsteady flow separation in high Mach number planar nozzles”, International Journal of Aeronautical Science & Aerospace Research (IJASAR), 2(6), 55-70, 2015.

110) Uzi A., Ostrovski Y., Levy A., Modeling and Simulation of Particles in Gas-Liquid Interface, Advanced Powder Technology, 27, 112–123, 2016.

111) Jelinek M., Levy A. and Borde I., The influence of diffusion absorption refrigeration's operating conditions on its performance. Applied Thermal Engineering, 99, 979–987, 2016.

112) Hadad Y., Kochavi E.and Levy A, Inductive heating with a stepped diameter crucible, Applied Thermal Engineering, 102, 149-157, 2016.

113) Ben-David O., Levy A., Mikhailovich, B., Avnaim M.and Azulay A., Impact Of Traveling Permanent Magnets On Low Temperature Metal Melting In a Cuboid, International Journal of Heat and Mass Transfer, 99, 882–894, 2016.

114) Avnaim M.H., Levy A., Mikhailovich, B., Ben-David O., Azulay A., Comparison of 3D Multi-Domain and Single-Domain Models for Describing the Horizontal Solidification of Gallium in a Rectangular Cavity', Journal of Heat Transfer , 138(11), 112301, 2016.

115) Ben-Ami Y., Uzi A., Levy A., Modelling the particles impingement angle to produce maximum erosion, Powder Technology, 301, 1032–1043, 2016.

116) Uzi A., Kalman H. and Levy A., A novel particle attrition model for conveying systems, Powder Technology, 298, 30–41, 2016.

117) Ben Ami Y. and Levy A., Absorbed Shear Energy during Solid Particle Impact on Ductile Surface, Wear, 368-369, 162–172, 2016.

118) Maurice U., Mezhericher M., Levy A. and Borde I., Particle Formation From Droplet Containing Nanoparticles: Internal Bubble Growth Drying Technology, 2017.

119) Uzi, A., Ben-Ami, Y., & Levy, A. Erosion Prediction of Industrial Conveying Pipelines. Powder Technology, 309, 49-60, 2017.

120) Eluk T., Levy A., Korytnyi E., Bar-Kohany T., Transition Mechanism Between Combustion Regions in Swirling Entrained Flow Downer Reactors, Energy & Fuels, 2017

121) Uzi, A. & Levy, A. Particles' degradation and dynamics in conveying systems. Powder Technology, , 2017.